Neil said:
Considering that you'll want mapping software and a cable in addition to your GPS the price tag may get a liitle heavy if you get a GPS that displays downloadable maps. (Don't forget you can always get a plastic grid overlay for 5 bucks and enter all your WP's manually from your paper maps
)
My unit dosn't have maps or an electronic compass and I find I get the best use out of it in conjunction with paper maps and a compass. I wouldn't want to be without the software. I have NG Topo! and it's great.
Yes, the cost can add up, however I feel the extra functionality is worth the cost.
Think of a situation where you might _really_ need the GPS--for instance, "confused" above timberline in howling wind, rain, and fog. Transferring locations between the map and the GPS is now very difficult to (pragmatically) impossible if you have to use lat-lon or UTM. If you have planned every move ahead of time and have appropriate waypoints in the GPS and plotted on a map, then you can transfer locations by inspection. With a mapping GPS you can always transfer locations by inspection. (Just compare the contour lines on the GPS and the map.) Or all the info you need may be shown on the GPS. (The small map shown on the GPS is good for showing the local area, the paper map is much better for the large picture.)
I have used my GPS with and without the appropriate maps loaded. With the maps is much better. (If you try it, you may never want to go back...)
It is also much easier to field program a route into a mapping GPS than a non-mapping unit. (For instance on a trip out west with no computer and a combination of paper topo and road maps without lat and lon.)
My GPS also has a compass--I never use it. I use a traditional compass. (The barometric altimeter is nice and generally more accurate than the GPS altitude--usually within 10 ft with auto-calibration.)
I carry all 4--map, magnetic compass, GPS, and a device that doubles as a hatrack. Each gives you different information and has different failure modes. The combination gives you redundancy and you should be able to navigate in most situations including failures of any of the first 3 as long as the hatrack keeps working...
I have both Mapsource topos and NG TOPO!. Each has strengths and weaknesses and I find them both useful. I primarily use Mapsource to interact with the GPS and NG to look at and print maps. I use either/both to look at tracks.
BTW for the OP: you can only load maps from the same manufacturer into a GPS (eg. Mapsource for Garmin.) Third-party mapping software can only transfer waypoints, routes, and tracks.
So, yes, you can use a non-mapping GPS and save some money, but I'm glad I spent the extra pennies.
Doug